Managing Customer Expectations with Construction Meetings

by

Lauren May

Customers have certain expectations about the finished state of their new homes. They paint pictures in their heads that may or may not accurately reflect the homes you’re building for them. As a result, it’s important that a homebuilder’s representatives, typically a site supervisor and a sales representative, properly manage customer expectations during the construction process.

One of the best ways to manage expectations is through construction meetings, which are held between the builder’s representatives and the customers while the home is being built. Most builders hold three such meetings: one that occurs before construction begins, one that occurs before drywall is installed, and one that occurs right before closing. They take place at key milestones during the home’s construction and give you the time to thoroughly explain the homebuilding process to educate customers and shape their expectations. In addition, if these meetings are successful, they lead to a friendly working relationship and higher customer satisfaction ratings. Infrequent or unclear communication usually leads to unwanted surprises later in the process, such as someone upset over a missing upgrade or a misunderstanding about the floor covering. Continuously making sure you and your customers are on the same page while the home is being built is important. Use these communication opportunities to your advantage!Pre-construction meeting At the pre-construction meeting, the customer reviews the site plan, home plans, and other paperwork for the home with the builder’s representatives, usually the site supervisor and sales representative. The meeting is typically held immediately before the foundation work begins on the home and is often accompanied by a lot walk, so the customer can get a complete picture of the site.Pre-drywall meeting At the pre-drywall meeting, the customer tours the home with a member of the builder’s team to review the construction and the location of the major mechanical and structural systems of the home. The meeting is usually held just after the framing is finished and insulated but before the drywall installation begins.Pre-closing meeting At the pre-closing meeting, the customer walks through the home with a member of the builder’s team–usually a site supervisor, sales representative, or quality assurance person–to review the construction and agree to close on the home. The meeting is typically held one week prior to closing. These days, customers are more likely than ever to take an active interest in how their home is built. As a result, much of your time has to be spent making sure the homes the customers have built in their heads is the home described in the paperwork. It’s up to you to manage their expectations so they’re satisfied with the final result.

BuildIQ promotes Best Practices in Homebuilding to help builders increase performance and improve quality. Through BuildIQ’s Jobsite website, builders can find answers to their most pressing homebuilding questions, such as how to manage customer expectations with

pre-construction meetings

,

pre-drywall meetings

, and

pre-closing meetings

. For more information about BuildIQ, visit BuildIQ.com.

Article Source:

ArticleRich.com

byAlma Abell

For those who have never gone through the process of Custom Home Construction in Liberty MO, there are important things to consider before starting. Below are several pieces of advice that, when followed, will help customers build the homes of their dreams.

Set a Budget (And Stick To It)

If clients don’t set a firm budget before beginning the home-building process, they may be in for an expensive surprise. Custom homes come with nearly endless options, and adding too many features can easily drive prices sky-high. While it’s important to leave some wiggle room for unforeseen circumstances, it’s equally vital to set an upper limit so spending doesn’t get out of hand.

Secure Financing

The next step is to learn about the basic types of home financing. Temporary construction loans can be changed to mortgages at closing, and some clients can finance the construction and wait to get a mortgage. Regardless of the circumstances, clients should find the best financing for their needs.

Find the Right Contractor for the Job

Clients should look for builders whose work exemplifies the qualities looked for in a new home. Then, research and vet options by checking with the BBB and reading consumer reviews. Be on the lookout for unethical business practices, a lack of online contact information, or numerous complaints about unfinished projects.

Communicate Effectively

During the process of Custom Home Construction in Liberty MO, clients should ask questions and request frequent updates. Communication styles can make or break a project, and if there’s little to no interaction between client and builder, that builder is not likely to build to spec.

Become Part of the Home-Building Process

The best custom home builders actively seek clients’ input throughout the processes of designing and building a home, and clients should want similar things. The more involved the client is in the construction process, the more they’ll love their new home. In most cases, people build custom homes with intentions to stay there for years, and working closely with the builder simply yields better and more livable results.

Consult an Expert Home Builder

The process of building a custom home is an exciting one, but it can be difficult if clients aren’t careful. If a client has questions about the process, they can Syler Construction Inc today.

By Seomul Evans

The rollback wrecker is an outstanding type of vehicle because of its versatility. Because of the design and engineering of this truck, it is rendered useful in a lot of different fields. From construction to mining and even towing to automobile business, this is a dependable truck.

The Design and Functions

The rollback wrecker is set apart from other types of vehicle because it has a flatbed at the back which can be rolled out. The mechanism allows the flat area at the back to extend backwards and tilt on an angle. Hence, it also becomes a ramp-like structure.

This is an important feature which allows heavy load, particularly cars to be placed properly on the flatbed. There is no need to lift the heavy load just to mount it on the wrecker. Once the vehicle or load is set on the surface, the flatbed rolls back to its normal position.

Unloading is far from complex too. The flatbed rolls backwards again and tilts so the load can be put on the ground.

Because of this function, it is possible to carry cars and other types of heavy load without making it touch the ground. The carrying method is similar to piggy-back style wherein the complete weight is shouldered by the truck.

Aside from having the flat surface for loading at the back, this type of wrecker also has an optional car hauler attachment. It is anchored to the back part of the truck so that it can also be utilized for pulling another vehicle. The truck would not carry the weight of the car being pulled because it rolls on its own but there would be no need to make the engine work.

The Multiple Uses

This type of wrecker is primarily used for towing vehicles. If in case the vehicle is smashed and the engine can no longer function because of an accident, it can be placed on the flat bed for transportation. On the other hand, there is also an option to pull the car and let it roll while being transported if there were only minor engine problems. Because there is an option to utilize both the flatbed and the anchor, it is possible to pull a car and load up other stuff at the same time, so long as the maximum capacity of the vehicle is not exceeded.

Aside from the towing business, this is also utilized in a lot of other industries. For construction, the truck is an effective means of transportation of oversized ad heavy materials from one site to another. For the automotive industry, the vehicles which need to be transported from the factory to the retail outlets do not even need to touch the ground just to be transported. Even agriculture, farming and timber industry find the flatbed of this wrecker to be very useful.

Operating the Truck

Because of the length and built of this vehicle, it is necessary to require special skills from the person who would be driving it. Merely knowing how to drive is not enough. The driver should be trained and licensed to handle such a vehicle. That is because, maneuvering this vehicle is far different from other cars since it takes special techniques to make turns or go on reverse. Plus, carrying heavy load and towing vehicles also require a lot of effort and skills.

About the Author: Seomul Evans is

SEO services

consultant and content writer for leading

Dallas Wrecker

company.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1490546&ca=Automotive

Home Improvement Programs on DISH Network

by

John Mark Adams

So are you planning to buy a house in near future or do you have plans to renovate your old house and give it a new look? We all have such desires for our home whether its big or small. But no matter how hard we try, we often end up jumbling up the whole concept, interiors, themes, decorative pieces, which lead to a clutter in the house. At this time you cannot expect your house to look wonderful. Rather it looks like a curio shop than a normal house. Certainly you do not want this to happen. But there is absolutely no need to be sad because all that you need is a little inspiration and proper information, which you can easily get from home improvements and dcor programs on DISH Network.

DISH Network, the leading provider of satellite TV packages across United States brings you a number of home dcor shows and lifestyle channels. Through these shows you can have a rough idea about the home decorating theme. Watching these shows also helps you draw some inspiration and create a unique theme for your home dcor. You will feel proud when people visit your house and praise for your fine selection of home dcor. It gives huge satisfaction when you get appreciation for your home dcor. If you like home dcor shows then you can watch them on different satellite TV channels in your DISH Network. These DISH TV shows cover a lot of areas like beauty, fashion, home dcor, entertainment and many more. You can also get some important tips and tricks related to home dcor. You can use these tips for home improvement and dcor. You can also use these tips for home improvement plans and utilization of space through which you can save money. This not only helps to save money but also improves the natural inflow of light and air. You can also create a green patch in your house or a small breakfast nook to make it look even more beautiful. It does not cost you much to create a beautiful house. Sometimes a simple coat of fresh paint is enough to create beautiful interiors of your house. You can also have small garden to create a relaxing haven. The DISH channels offer you an important insight about home improvement plans. This helps you with updates on your kitchen, bathroom, bedroom, living room and other rooms, which you might feel like decorating. If you face an issue regarding the availability of space, DISH Network is at your rescue as the programs on DISH HD channels would also suggest you how you can make space for better decoration of your house. Now let us take a quick look at some DISH Network channels which air programs on home dcor. The first is DIY; it is one of the DISH channels that offer you some great programs on home improvement and dcor, which you can carry out easily. HGTV or Home and Garden TV is another popular satellite TV channel which airs interesting programs on home dcor and improvement. DISH Network

offers some of the most innovative shows for the viewers of different tastes. You have the option to choose from range of exciting

DISH TV offers

.

Article Source:

ArticleRich.com

September, 2016 byadmin

Ships are subjected to quite a few hazards over the course of their lifetimes. Whether on the move or waiting in the dock for their next trip, water alone holds plenty of reasons to be concerned. Particularly in the warm, salt-ridden waters of the southern seas, corrosion and paint blistering are distinct possibilities. With barnacles, muscles, bacteria, various forms of algae and other hitchhikers lurking everywhere, routine hull maintenance is vital to keeping a ship in service.

Simple cleaning and scraping are sometimes enough to remove all the buildup and marine life clinging to a ship’s surface, but over time, the need for a more in-depth approach becomes imminent. Ships sandblasting in Anderson SC removes those elements to reveal the unblemished metal underneath all those layers of scum, old paint, and protectant. Though these may sound like nothing more than cosmetic issues, they can actually cause quite a few complications.

On the most basic level, corrosion is a definitive factor. It starts with surface stains making the paint appear less-than-perfect, but it ultimately wears away at the ship itself. Aside from the paint job, all this buildup will eventually affect a ship’s speed, maneuverability and efficiency. Eventually, it’ll begin to eat through the body of the ship and compromise its structural integrity.

Ships Sandblasting in Anderson SC tends to be a complicated process. It can’t be performed just anywhere; in fact, the ship must be dry-docked in order to be stripped of its paint and layers of waterborne organisms. At the same time, just where sandblasting is allowed to take place is dictated by federal regulations. Paint scoured off the hull of a ship is considered to be an environmental hazard, so it must be well contained and properly disposed of.

Though plenty of people have small-scale sandblasting equipment at home, these tools aren’t capable of holding up to the demands of abrading an entire ship. Professional training is also key as untrained individuals could end up doing more damage to the ship than intended. Click here to learn more about the sandblasting process as well as its importance and the potential dangers involved.